BENGglas MAX

With significantly fewer spacers than other products on the market, BENGglas MAX delivers unparalleled insulation performance (U=0.40 or U=0.50) that includes triple glazing (U=0.80), double glazing HR++ (U=1.10) and far exceeds other brands of vacuum glass (U=0.70).

The slim and carefully designed sealing edge contributes to maintaining the insulation value without the possibility of small microcracks developing, which could increase the U-value. This ensures that the insulation value remains stable even after 25 years, whereas with traditional insulating glass the insulation value increases over the years.

Thanks to the slim sealing edge of only 9 mm (including absorption strip 14 mm), BENGglas MAX is easy to install in existing window frames. This allows you to save on additional material costs while benefiting from the authentic or monumental appearance of your home or building. This makes BENGglas MAX very suitable for the renovation and restoration market.

BENGglas MAX is available in a double or single coating. This coating blocks extra heat and light, resulting in lower insulation and light transmission with a double coating. BENGglas MAX 0.40 (double coating) therefore looks optically a bit darker and can be regarded as a slightly sun-resistant variant.

Below you will find the specifications per type. You can also easily consult the brochure for an overview.

Download the brochure

• U-value: 0.40
• LTA value (light transmission value): 70%
• G-value (heat radiation): 0.39

CORRESPONDING SPECIFICATIONS WITH BENGglas MAX 0.50

• Available glass thicknesses: 8.3 mm, 10.3 mm and 12.3 mm.
• Tempered as standard, injury-resistant without thermal breakage.
• Free from vacuum caps.
• Slim sealing edge of only 9 mm (incl. strip: 14 mm).
• Maximum dimensions: 2,000 x 3,000 mm.
• Minimum dimensions: 200 x 230 mm.
• The absorption strip is always on the longest side.

• U-value: 0.50
• LTA value (light transmission value): 78%
• G-value (heat radiation): 0.58

CORRESPONDING SPECIFICATIONS WITH BENGglas MAX 0.40

• Available glass thicknesses: 8.3 mm, 10.3 mm and 12.3 mm.
• Tempered as standard, injury-resistant without thermal breakage.
• Free from vacuum caps.
• Slim sealing edge of only 9 mm (incl. strip: 14 mm).
• Maximum dimensions: 2,000 x 3,000 mm.
• Minimum dimensions: 200 x 230 mm.
• The absorption strip is always on the longest side.

BENGglas MAX is the type with the best insulation value within the BENGglas® range and is now available in large sizes up to 2 by 3 meters. BENGglas MAX can also be produced in a monumental, layered or thickened version. Additional sun protection coatings are also possible.

By ordering directly through BENGglas®, the exclusive distributor of LandVac in the Benelux, you also benefit from a guaranteed manufacturer's warranty of up to 15 years!

The power of BENGglas® lies in its unparalleled insulation performance packaged in an ultra-thin profile of only 8.3 mm thick. This makes the glass by far thinner and better insulating than any other type of insulating glass. This means that the glass even fits in single-glazed frames, where triple and HR++ glass cannot provide a solution without having to replace the entire frame.

Download the brochure